Mixing & Homogenization

-


Vacuum Mixer / Homogenizer
 
Vacuum mixer processing plants from 1 to 400 L  made by ESCO Labor Switzerland.
All plants are manufactured to meet the highest pharmaceutical standards and with agrochemical, cosmetic, toiletries or consumer products.
The workable solution offered by ESCO includes with all the tools necessary for your quality production.
The entire units are built on a  polished free standing stainless steel frame. 
Homogeniser and a Scraper stirrer are mounted to allow optimal mixing and homogenization also under higher viscosities.
Speed regulation, Temperature, Vacuum/ pressure and all critical process parameters can be controlled and monitored.
-


Microfluidizer -  High Shear Fluid
Microfluidizer high shear fluid processors are unique in their ability to achieve uniform particle size reduction, bottom-up crystallization and efficient cell disruption - enabling innovative companies to develop nano-enabled medicines, chemicals and consumer products that change the world. Product enters the system via the inlet reservoir and is powered by a high-pressure pump into the interaction chamber at speeds up to 400 m/s. It is then effectively cooled, if required, and collected in the output reservoir.
The exclusive fixed-geometry interaction chambers is the heart of our technology, and combines with a constant pressure pumping system to produce unparalleled results. 

Microfluidizers generate significantly higher shear than other methods and more uniform particle size reduction. It is important to note that customers are able to precisely control the level of shear applied, enabling them to process shear-sensitive materials and high-pressure applications. By reducing particles to the nano-level more efficiently, customers use less energy to achieve particle size results that are, on average, half the size of even the most effective homogenizer outputs.
Microfluidics has proven its value to thousands of customer applications over the years: producing the most narrow particle size distribution results possible. Naturally, this yields greater stability, longer shelf life, more efficient use of raw materials and significant potential savings in filter area.
 
Microfluidics further differentiates from other technologies in that not only are results repeatable from batch to batch, but also from lab environments to pilot and production volumes. This is achieved by aligning microchannels  in parallel within the interaction chamber, with a  single output reservoir. This essentially ensures the entire product stream experiences identical shear, resulting in consistent quality no matter the volume,
from 1 mL  and up to 60 L/min.

 
 
-


THINKY -  Mixing & Degassing 
 
The planetary Centrifugal De-aeration Mixer is a mixer and a de-aerator that disperses materials uniformly and de-aerates at the same time. High speed revolution and rotation on the orbital path Centrifugal controls the container filled with materials. Revolution causes powerful acceleration that promotes de-aeration, and at the same time rotation generates convection of materials in the container, achieving quick dispersion and de-aeration. Utilized in processing of various materials such as adhesive, silicon resin , epoxy resin, nanotubes, sealing material for LEDs as well as ointment preparation in Pharma.
Ease of operation, quick operation, high reproducibility , lack of mixing blades , NO Cleaning , and no Air Bubbles are some of the unique features of THINKY Mixer.
 

Tetra Sense Scientific Tools Ltd.      Tel:+972 (0)4 6272720,      Fax:+972 (0)4 6272719,      Email: sales@tetrasense.co.il

Address: 19 Bareket St,  POB 3107, Industrial Park (North) Caesarea 3088900, Israel      Website: www.tetrasense.co.il




 
Livecity - Website Builder